ActSafe PME Bedienungsanleitung PDF herunterladen (Seite 27)

User’s Manual PME Ascender 4-stroke engine

TROUBLE SHOOTING GUIDE

If this guide does not solve your problems,

 rst check the engine manual for further

trouble shooting guide and then contact

ActSafe Systems AB or by ActSafe approved

distributor.

TROUBLE SHOOTING GUIDE

The engine does not start

The lifting capacity is notably weak

The grab on the rope is poor, the rope slips

PROBABLE CAUSE REMEDY

Empty tank Refuel the ascender.

Ignition cable loose Reattach the ignition cable to the spark plug.

Wrong fuel Empty the tank, clean and refuel the ascender.

Wrong carburettor settnings Set the carburettor, see service instructions.

PROBABLE CAUSE REMEDY

The fuel is wrong Change to recommended fuel.

The winch is being used at

high altitude.

High altitude will result in loss of performance. The engine can be equipped

for use at high altitude. Contact ActSafe or an approved distributor.

The engine is in bad condition Service the engine.

PROBABLE CAUSE REMEDY

Rope connected incorrectly Reconnect the rope.

The rope is not suitable

for the ascender

Change the rope.

The rope grab is worn

The ascender is in need of repair and service, contact ActSafe

or an approved distributor.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32

Keine Kommentare

ActSafe PME Bedienungsanleitung Seite 27